Digital Inputs Two 2-Channel Inputs
Type AES / EBU
Impedance 110Ω
Sample Rate 44.1kHz, 48kHz, 88.2kHz*, 96kHz*
Word Length 24-bit or 16-bit
*SRC Input at these sample rates

Analogue Inputs Four
Type Electronically balanced (Pin 2 Hot)
Impedance (Ω) Balanced 20k
Impedance (Ω) Unbalanced 10k
Common Mode Rejection >80dB @ 1kHz
Maximum level + 21dBu

Audio Outputs Eight
Type Electronically Balanced (Pin 2 Hot)
Minimum load impedance 56Ω/20nF
Source impedance 56Ω
Maximum level + 21dBu into > 2kΩ

Performance
Frequency response (20 Hz to 20 kHz) +/- 0.3dB with all filters and EQ flat
Distortion (THD+N) <0.02% @ 1kHz, +8 dBu
Dynamic range (20 Hz to 20 kHz unweighted) >114dB

Input Processing (per channel)
Input gain +12dB to -40dB in 0.1 dB steps plus Off
Parametric EQ 1-12
Frequency range: 20Hz to 20kHz in 21 steps per octave
Boost/cut: +6/-18dB in 0.1dB steps
Q: 3.0 to 0.08
Compressor
Threshold: +21dBu to - 10dBu in 0.1dB steps
Attack: 40us to 100ms
Insert: On/Off
Release: 10ms to 2000ms
Ratio: 1:1 to 5:1
Knee: Hard/Soft
Delay 0 to 1 second 342.25 m or 1122’ 10” at 20(C) in 20.8us steps

Output Processing (per channel)
Routing Full featured matrix mixing: any combination of inputs can be routed to any output in .1dB steps from 0dB to –40dB and OFF

Delay 0 to 300ms (102.68 m or 333’ 10” at 20(C)in 5.02 us steps)

Phase correction filters 0° to 180° in 5° steps
All pass filter 1st and 2nd order

Low pass filter frequency range 20Hz to 20kHz in 21 steps per octave.
Supported configurations are:
Butterworth (6dB/Oct, 12dB/Oct, 18dB/Oct, 24dB/Oct, 36dB/Oct, 48dB/Oct)
Linkwitz-Riley (12dB/Oct, 24dB/Oct)
Bessel (12dB/Oct,18dB/Oct, 24dB/Oct, 36dB/Oct, 48dB/Oct)

High pass filter frequency range 20Hz to 20kHz in 21steps per octave.
Supported configurations are :
12dB/Oct Peaking, 24dB/Oct Peaking
Butterworth (6dB/Oct, 12dB/Oct, 18dB/Oct, 24dB/Oct, 36dB/Oct, 48dB/Oct)
Linkwitz-Riley (12 dB/Oct, 24dB/Oct)
Bessel (12dB/Oct,18dB/Oct, 24dB/Oct, 36dB/Oct, 48dB/Oct)

Peaking Filter Boost 0dB to +6dB in 0.1dB steps.

Parametric EQ 1
Frequency range 20Hz to 20kHz in 21steps per octave.
Low shelf filter Boost/cut +12/-12dB in 0.1dB steps
Parametric EQ Q 3.0 to 0.08
Shelf slope 6dB/Oct and 12dB/Oct

Parametric EQ 2-5
Frequency range 20Hz to 20kHz in 21steps per octave.
Boost/cut +12/-12dB in 0.1dB steps
Q 3.0 to 0.08

Parametric EQ 6/ f
F requency range 20Hz to 20kHz in 21steps per octave.
Hi shelf filter Boost/cut: +12/-12dB in 0.1dB steps
Parametric EQ Q 3.0 to 0.08
Shelf slope 6 dB/Oct and 12dB/Oct

Polarity invert Normal/invert

Output gain +12dB to -40dB in 0.5dB steps plus Off

Look-ahead limiter
Threshold +21dBu to - 10dBu in 0.5dB steps
Release: 10ms to 1000ms
Knee: Hard/Soft

Compressor
Threshold +21dBu to -10dBu in 0.1dB steps
Attack 40us to 100ms
Insert On/Off
Release 10ms to 2000ms
Ratio 1:1 to 5:1
Knee Hard/Soft

Mute On/off

Terminations
Audio inputs/outputs 3 pin XLR
Ethernet inputs/outputs Ethercon
RS-232 8 pin Mini-DIN socket (front)
9 pin D-type (rear)
World Clock BNC
Power 3 pin IEC

Power Requirements
Voltage / Consumption 100 to 240V a.c ±10% 50/60Hz < 60VA

Dimensions
Height 44 mm (1.75 inch) - (1U)
Width 483mm (19 inch)
Depth 287mm (12 inch)

Weight
Nett 4kg
Shipping 6kg

Trade Descriptions Act: Due to the company policy of continuing improvement,we secure the right to alter these specifications without prior notice.

Back to DN9848E Loudspeaker Processor