DN500 Plus Technical Data

Input Two
Type Electronically balanced (pin 3 hot)
Impedance (Ω)
Balanced 20k
Unbalanced 10k

Side Chain Inputs Two (Compressor) + Two (Expander)
Type Electronically balanced (tip hot)
Impedance (Ω)
Balanced 20k
Balanced 10k

Audio Outputs Two
Type Unbalanced (pin 3 hot)
Minimum load impedance 600 Ω
Source impedance <60 Ω
Maximum level +21dBu

Performance
Frequency response (20Hz-20kHz) ± 0.5dB
Distortion (THD+N) < 0.03% @ 1 kHz,+4dBu
Equivalent input noise (20Hz-20kHz unweighted) <-94dB

Compressor
Threshold -30dB to +20dB
Ratio 1:1 to 50:1
Knee 1dB (Hard) to 40dB (soft)
Envelope switchable auto (attack and release controls disabled) or manual
Attack (90% capture) 50us to 20ms
Release (90% recovery) 60ms to 2 secs

Expander
Threshold -40dB to +20dB
Ratio 1:1 to 25:1
Attack Switchable auto or fixed (2ms)
Release (90% recovery) 40ms to 2 secs
Output Gain -10dB to +30dB

Limited/Clipper
Threshold 0dB to +20dB

Power Requirements
Voltage 110/120/220/240V 50/60Hz
Consumption <30VA

Weight
Nett 5kg
Shipping 6kg

Dimensions
Width 482mm (19 inch)
Depth 292mm (11.5 inch)
Height 44.5mm (1.75 inch)

Terminations
Audio inputs/outputs 3 pin XLR
Side-Chain inputs normalled 1/4 inch stereo jack
Power IEC

Options
Security Cover
Transformer input* / output balancing
* Input transformer balancing is non retrofittable and has to be specified with order.

Trade Descriptions Act: Due to the company policy of continuing improvement, we secure the right to alter these specifications without prior notice.

DN504 Plus Technical Data

Inputs Four
Type Electronically balanced (pin 3 hot)
Impedance (Ω)
Balanced 20k
Unbalanced 10k

Side Chain Inputs Four
Type Electronically balanced (tip hot)
Impedance (Ω)
Balanced 20k
Balanced 10k

Audio Outputs Four
Type Unbalanced (pin 3 hot)
Mininimum load impedance 600 Ω
Source impedance <60 Ω
Maximum level +21dBu

Performance
Frequency response (20Hz-20kHz) ± 0.5dB
Distortion (@ + 18dBu) <0.03% @ 1kHz
Dynamic Range >115dB
Channel separation >90dB @ 1kHz

Compressor
Threshold -30dB to +20dB
Ratio 1:1 to 50:1
Knee Switchable 1dB (hard) / 40dB (soft)
Envelope Switchable auto (attack and release controls disabled) or manual
Attack (90% capture) 50us to 20ms
Release (90% recovery) 60ms to 2 secs
Output Gain -10dB to +30dB

Terminations
Audio inputs/outputs 3 pin XLR
Side-chain inputs Normalled 1/4 inch stereo jack
Power IEC

Power Requirements
Voltage 110/120/220/240V 50/60Hz
Consumption <30VA

Weight
Nett 4kg
Shipping 6kg

Dimensions
Width 482mm (19 inch)
Depth 292mm (11.5 inch)
Height 44.5mm (1.75 inch)

Options
Security Cover
Transformer input* / output balancing
* Input transformer balancing is non retrofittable and has to be specified with order.

Trade Descriptions Act: Due to the company policy of continuing improvement, we secure the right to alter these specifications without prior notice.

DN514 Plus Technical Data

Input Four
Type Electronically balanced (pin 3 hot)
Impedance (Ω)
Balanced 20k
Unbalanced 10k

Key Inputs Four
Type Electronically balanced (tip hot)
Impedance (Ω)
Balanced 20k
Balanced 10k

Audio Outputs Four
Type Unbalanced (pin 3 hot)
Min. Load impedance 600 Ω
Source impedance <60 Ω
Max. level +21dBu

Performance
Frequency response (20Hz-20kHz) ± 0.5dB
Distortion (@ + 4dBu) <0.03% @ 1kHz
Noise floor (20Hz-20kHz unweighted) -100dBu
Gate closed <-94dBu
Gate open< -100dB
Attack programme related semi-automatic 50us to 200us "fast" 500us to 2ms "slow"
Hold/release Variable 40ms to 2sec
Threshold variable -40dBu to +20dBu
Attenuation >84dB Gate closed

Key Filters
High pass filter 20Hz-5kHz/12dB octave
Low pass filter 80Hz-20kHz/12dB octave

Terminations
Audio inputs/outputs 3 pin XLR
Key inputs 1/4 inch stereo jack
Power IEC

Power Requirements
Voltage 110/120/220/240V 50/60Hz
Consumption <30VA

Dimensions
Width 482mm (19 inch)
Depth 292mm (11.5 inch)
Height 44.5mm (1.75 inch)

Weight
Nett 4kg
Shipping 6kg

Options
Security Cover
Transformer input* / output balancing
* Input transformer balancing is non retrofittable and has to be specified with order

Trade Descriptions Act: Due to the company policy of continuing improvement, we secure the right to alter these specifications without prior notice.

Back to DN500 Plus Series