Product List

 

Photos: Main | Front | Back

DN100

The KLARK TEKNIK DN100 Single Channel Active Direct Injection Box is designed to provide an extended dynamic range, lower noise floor and all the world-class audio performance you’d expect from KLARK TEKNIK. The DN100 is built to handle the rigours of life on the road: a thick aluminium shell protects the electronics, and this in turn is protected by a tough silicone rubber casing.

The DN100 was designed for professional applications where +48 V phantom power is a standard feature on all mixing consoles. Some DI boxes offer both phantom power and 9V battery operation, however the design compromises required to support both power sources means that the audio performance is degraded. Most notably the amount of signal headroom available. The clip point of the DN100 is significantly higher than many professional active DI boxes and can provide +10 dBu into a 2 kΩ load. This higher clipping point means that much higher level input signals can be accommodated without the need for switching in an attenuating pad. Correspondingly the DN100 only requires a single -30 dB pad for use when connecting directly to instrument amplifier outputs.

Overview

  • Single Channel Active DI Box
  • Phantom (+48 V) powered
  • Accepts a maximum input level of +40 dBu
  • Switchable -30 dB input pad
  • Earth lift switch isolates input and output grounds
  • Extended dynamic range and lower noise floor
  • Rugged thick aluminium shell and tough silicone rubber casing
  • Security slot for Kensington MicroSaver security cable
  • Pad (-30 dB), Earth lift and +48 V Phantom LED indicators
  • Extended low frequency response
  • Compact and rugged design
  • Designed and engineered by KLARK TEKNIK in England
All trademarks belong to their respective owners. Kensington and MicroSaver are registered trademarks of ACCO Brands