Helix DN9848E System Controller Host Code Version 4.05

What is it, and why do I need it?
The DN9848E Helix System Controller Software Version 4.05 Host Code is the control programme that runs inside the DN9848E Helix System Controller. This release upgrades version 4.04. We recommend that all users upgrade to this version.

Version 4.05 contains the following new or updated features over V4.04 host code:

• AES3 port may not synchronise at power up
  An issue has been fixed where certain types of digital device would not immediately sync on power up unless the DN9848E was powered up first.

The major version number of 4 indicates that it interoperates at a communications level with all other Klark Teknik products running version 4.xx – this includes DN9340, DN9344, DN9340E, DN9344E, DN9848, DN9848E, other Elgar Add-Ins and so on. Note that it is possible to run products with version 3.xx and 4.xx side-by-side, but they must have separate physical communication paths, and the version of the Host Code and Add-In must have the same protocol. See the user manual for more details.

Follow the link at the bottom of this page to download the latest version of the software.

What do I need to do it, and how do I go about doing it?
To update your DN9848E Helix System Controller to version 4.05, you will need:

A PC running Windows 98, Windows 2000 or Windows XP, with at least 1 COM port or a USB to Serial Converters (see FAQ for supported converters)

Klark Teknik Program Manager V2.0 or newer (available on this site, and installed automatically with Elgar version 2.64) Cable connection between serial port on the computer and the front port of the DN9848E (this cable is supplied with the unit or is available from your dealer).

A DN9848E Helix System Controller

How to reprogram the DN9848

Download Helix DN9848E Host Code V4.05

Back to Software