DN9652 Technical Specifications

Front panel description
1 x Inlet Air Vent
1 x ETHERNET CONTROL Activity LED (Green)
1 x Pair of green/red Network A Clock Status LED indicators (OK, ERROR)
1 x Asynchronous Sample Rate Converter ASRC ENABLED LED indicator
2 x Network Output “STOP OUTPUT CLOCK IF INPUT FAILS” yellow and red LED indicators (ENABLED, STOPPED)
1 x Pair of green/red Network B Clock Status LED indicators (OK, ERROR)
1 x Backlit Alphanumeric LCD Display (16 characters x 2 Lines
1 x KLARK TEKNIK Tufflex label roundel label with Blue LED illumination

Rear panel description
1 x Ethernet Control Port - Neutrik EtherCon with LED status indication
1 x Third Party Network Module Interface (NETWORK MODULE A)
1 x Reset Switch (recessed)
1 x Word Clock Input – Neutrik BNC with 75 ohm termination
1 x Word Clock Output – Neutrik BNC (no termination)
1 x Video Black Burst Input – Neutrik BNC with 75 ohm termination
1 x Third Party Network Module Interface (NETWORK MODULE B)
1 x mains inlet with integral fuseholder and switch
1 x 40 mm fan outlet with finger guard
Electrical Safety Earthing Point

Power Requirements
Voltage 100V a.c. to 240V a.c. ±10%
Frequency 50Hz to 60Hz
Consumption <50W

Dimensions
Height 44.45 mm (1.75”), 1U high
Width 482.0 mm (19.0”)
Depth 410.0 mm (16.1”)

Weight
Net 5.5kg
Shipping 7.5kg

Back to DN9652